SC-A1025 Life-Size PVC Knee Joint Anatomy Model for Medical Education
A natural-size knee joint model mounted on a plastic seat, built to show flexion, extension and inward/outward rotation in anatomy and clinical skills teaching.
Model SC-A1025PVC BodyNatural Size12 x 12 x 33 cm
SEO Snapshot
SEO Title: Life-Size PVC Knee Joint Model for Medical Education SC-A1025
Meta Description: SC-A1025 life-size PVC knee joint model shows flexion, extension and inward/outward rotation for medical school anatomy and first aid training programs.
URL Slug: pvc-knee-joint-anatomy-model-sc-a1025
Product Summary
The SC-A1025 is a natural-size knee joint model produced in PVC and placed on a plastic seat. It reproduces knee flexion, extension and inward/outward rotation, so students can handle the joint movement instead of only reading about it. With an overall size of 12 x 12 x 33 cm, the model fits standard classroom benches and skill-lab tables used by medical schools, nursing colleges and first aid training centres. It is supplied as a single joint unit for anatomy demonstration, joint-motion explanation and positioning practice.
SC-A1025 knee joint model, side viewSC-A1025 anatomy knee joint model on the plastic seat
Key Features
Four-Way Joint MotionThe model shows knee flexion, extension and inward/outward rotation, covering the movement range that would otherwise need several static pieces.
Natural SizeBuilt at natural size, the joint keeps the proportions students meet on a real patient during positioning and palpation practice.
Plastic Seat MountDelivered placed on a plastic seat, it stays steady on the table while both hands move the joint.
Compact 12 x 12 x 33 cmThe compact footprint lets teaching departments store and carry several units without dedicated display cabinets.
PVC ConstructionPVC is specified for durability, resistance to deformation and a high degree of authenticity under repeated classroom handling.
Manual OperationNo power supply and no matched equipment are required, so the model can be used in any teaching room.
Technical Specifications
Model
SC-A1025
Product Type
Anatomy model, knee joint
Material
PVC, mounted on a plastic seat
Scale
Natural size
Dimensions
12 x 12 x 33 cm
Movements Shown
Knee flexion, extension, inward and outward rotation
Operation Mode
Manual operation
Matched Equipment
None required
Working Condition
Ambient temperature 0~35 C, room temperature kept constant
Primary Industry
Medical education
Models and Options
SC-A1025 - the knee joint model described on this page: natural size, PVC body, placed on a plastic seat, 12 x 12 x 33 cm.
Logo printing - the LOGO can be printed on the machine once technical verification is completed with no issues, or a custom LOGO label can be produced and attached to the machine.
OEM / ODM - OEM and ODM services are offered, and for some products dedicated customization is available once the product quantity requirement is met.
Materials and Structure
The joint body is produced in PVC, a material chosen for durability, resistance to deformation and a high degree of authenticity. The model is placed on a plastic seat that raises the joint to a convenient working height and gives the base stability during demonstration. It is a single knee joint at natural size, 12 x 12 x 33 cm, articulated so that flexion, extension and inward/outward rotation can all be shown on one unit rather than on a full lower-limb figure. Operation is manual, with no matched equipment.
Applications
The model is used in medical education, typically for medical school teaching and first aid training. It suits anatomy lectures, joint-motion demonstrations and hands-on practice sessions where students observe and repeat each movement themselves. Working condition is an ambient temperature of 0~35 C with a stable room temperature, neither too high nor too low. This knee joint model family is deployed across markets including the Middle East, Southeast Asia and South Asia.
Medical education classroom settingAnatomy training session
Customization
OEM and ODM services are available, and for some products dedicated customization is possible once the quantity requirement of the product is met. LOGO printing on the machine can proceed after technical verification is completed and no issues remain; alternatively a specially customized LOGO label can be produced and attached to the machine. Export packaging is neutral, without any logos, in cardboard boxes or wooden boxes prepared in accordance with export standards.
Case Study
A medical manikin distributor in India ordered 500 units for medical teaching. The models have been in use for 1 year with stable operation, and the project is recorded as customized and durable.
Customized manikin package for the India distributor
FAQ
Which movements does the SC-A1025 demonstrate?
It shows knee flexion, extension and inward/outward rotation.
What material is the model made of?
The joint body is PVC and it is placed on a plastic seat.
What is the size of the model?
It is built at natural size with dimensions of 12 x 12 x 33 cm.
Does it need power or extra equipment?
No. Operation is manual and no matched equipment is required.
What are the working conditions?
Ambient temperature 0~35 C, with the room temperature kept constant, neither too high nor too low.
Can our LOGO be added or the model be customized?
Yes. OEM and ODM services are offered, LOGO printing on the machine is possible after technical verification, and a custom LOGO label can also be produced.
Which export certificates can be provided?
Official export certificates available include ISO9001, ISO14001, ISO45001, ISO13485, CE and RoHS. Where customs clearance requires additional documents such as CO, Form E or Form F, these can be provided.
Is there a reference project for this product range?
Yes. A medical manikin distributor in India purchased 500 units for medical teaching; the units have run stably for 1 year.
✓ Verified Elite Supplier
